Underbody protection 500 ml

Features:

• Not overpaintable
• Corrosion resistance in salt spray mist according to DIN 50021: 500 hours without rust infiltration at 2 mm film thickness
• High elasticity
• Mandrel test up to 32 mm without fissuring
• Yield: 1,5 m²
• Dry to handle after 3-4 hours
• Dried through after 24 hours
• Temperature resistance from -25 °C to max. 80 °C
• With an anti-humming effect
• Based on Bitumen

Areas of application:

Cartechnic underbody protection is mainly used in the area of underbodies and wheel arches of motor vehicles (cars, caravans, fuel tanks, boats, trucks, spoilers, sills). A thick, elastic layer protects the vehicle against mechanical and chemical stresses such as stone chips, road salt, water, etc., and thus prevents corrosion in particularly.

Usage:

Shake can before use. Remove dirt, grease and rust. Recommended spray distance approx. 30 cm. The recommended strength of coating is 500 to 600 µm. Best results at room temperature 15 °C to 25 °C.

Storage:

Do not store at a temperature below 10 °C and above 30 °C. Protect from exposure to direct sunlight and heat. Store cool.

Available as: