EGR Valve-Cleaner

Features:

• Very good surface wetting
• Short exposure time (15 minutes)
• Excellent cleaning effect on carbonaceous residues
• Without solvents
• Non-flammable

Areas of application:

Cleaning of smaller components in the intake and exhaust system such. B. EGR valves.

Usage:

1. Use only on the disassembled component.
2. Spray the surfaces or parts to be cleaned with the cleaning foam at intervals of 5 seconds.
3. Let the foam work for at least 15 minutes.
4. Rinse the cleaned surface or component with running water and dry it with compressed air. Reinstall the dry component.
5. In the case of heavy soiling, it may be necessary to repeat the cleaning (item 2-4) several times.
6. Attention! Too much cleaning fluid in the intake area may cause damage when starting or while the engine is running.

Note:

• Use only outdoors or in well-ventilated areas.
• Too much cleaning fluid in the intake area may cause damage when starting or while the engine is running.
• Observe the manufacturer's instructions before working on the intake or exhaust system.
• Use of the product requires sufficient knowledge of the operation of vehicle engines to prevent the possibility of failure or consequential damage.
• Application and system temperature should not fall below 20 ° C and not exceed 30 ° C.

Available as: